皇冠网址大全-皇冠网开户地址是_百家乐计划工具_赌博全讯网网站 (中国)·官方网站

會議時間：2024年4月25日（星期四）9:00

會議地點：科技D樓404會議室

舉辦單位：柔性電子（未來技術）學院、先進材料研究院

大會報告：Metal halide perovskites for solar cells and LEDs

報告人：高峰教授

報告人單位：瑞典林雪平大學

大會報告：有機半導體光伏器件：性能，穩定性及應用

報告人：李哲教授

報告人單位：倫敦瑪麗女王大學

大會報告：Perovskite and Organic Electronics for Medical Applications

報告人：趙鈮教授

報告人單位：香港中文大學

報告題目：Multi-material nanoscale 3D fabrication based on femtosecond light sheets

報告人：陳世祈教授

報告人單位：香港中文大學

審核：安眾福

報告人簡介：高峰, 瑞典林雪平大學教授，光電子研究單元負責人，目前也是西湖大學訪問教授。2004年和2007年南京大學物理系獲得學士和碩士學位，2011年劍橋大學卡文迪許實驗室獲得博士學位。隨后加入瑞典林雪平大學，先后任職瑪麗居里博后研究員 (2013)、助理教授 (2015)、副教授 (2017) 和教授 (2020)。自2023年起擔任中國科學-材料雜志的副主編。高峰教授的研究興趣為可溶液加工的光電器件及機理，主要基于有機和鈣鈦礦半導體材料。相關工作作為通訊作者發表在Science, Nature, Nature Materials, Nature Photonics, Nature Energy, Nature Electronics等雜志。高峰教授獲得瑞典及歐盟的多項人才計劃支持，包括瓦倫堡學者（Wallenberg Scholar 2024）、瑞典戰略研究基金會的未來科研領袖（Future Research Leader 2019）、瓦倫堡青年學者（Wallenberg Academy Fellow 2017）、歐洲研究理事會的鞏固基金(ERC Consolidator Grant 2021) 和啟動基金（ERC Starting Grant 2016）。作為首席科學家主持瑞典瓦倫堡基金的重點前沿科學項目。2020年因在太陽能電池和發光二極管領域的機理研究獲得瑞典皇家科學院頒發的塔格·埃蘭德首相獎（Tage Erlander Prize）。

報告人簡介：李哲，倫敦瑪麗女王大學準教授(Reader)、博士生導師, 皇家化學會會士。于2012年獲英國劍橋大學博士學位，后于英國帝國理工學院，卡迪夫大學等擔任科研及教學職位。曾獲劍橋大學全額博士獎學金、Sir Neville Mott基金會環境物理獎學金，歐盟Ser Cymru Fellowship，EPSRC New Investigator Award等榮譽獎勵。主要從事新型半導體光電材料與器件的研究。在Science，Joule，Energy and Environmental Science, Nature Communications, Advanced Materials, Journal of American Chemical Society等期刊發表SCI論文80余篇。

報告人簡介：Dr. Ni Zhao is a Professor in the Department of Electronic Engineering at The Chinese University of Hong Kong. She obtained her Bachelor’s degree from Tsinghua University in 2002, followed by a Master’s degree from McMaster University in 2004 and a Ph.D. from the University of Cambridge in 2008. Following her doctoral studies, she served as a postdoctoral research associate at the Massachusetts Institute of Technology from 2008 to 2010. In 2010, she joined the Department of Electronic Engineering at The Chinese University of Hong Kong, where she currently holds the position of Full Professor. Dr. Zhao’s recent work focuses on the development of low-cost energy harvesting devices, nanostructured optoelectronic devices, and sensors for biomedical applications. Her research to date has resulted in over 170 journal publications, with an h-index of 71. Prof. Zhao was listed as one of the Highly Cited Researchers for 2018 by Clarivate Analytics and is a Fellow of the Royal Society of Chemistry and a member of The Hong Kong Young Academy of Sciences. She currently serves as the Associate Editor ofScience Advancesandthe Journal of Materials Chemistry.

報告人簡介：Dr. Shih-Chi Chen is a Professor in the Department of Mechanical and Automation Engineering at the Chinese University of Hong Kong. He received his B.S. degree in Mechanical Engineering from the National Tsing Hua University, Taiwan, in 1999; and his S.M. and Ph.D. degrees in Mechanical Engineering from the Massachusetts Institute of Technology, U.S., in 2003 and 2007, respectively. Following his graduate work, he entered a post-doctoral fellowship in the Wellman Center for Photomedicine, Harvard Medical School, where his research focused on biomedical optics and endomicroscopy. From 2009 to 2011, he was a Senior Scientist at Nano Terra, Inc., a start-up company founded by Prof. George Whitesides at Harvard University, to develop precision instruments for novel nanofabrication processes. His current research interests include ultrafast laser applications, biomedical optics, precision engineering, and nanomanufacturing. Dr. Chen is a Fellow of Optica (formerly OSA), Fellow of American Society of Mechanical Engineers (ASME), Fellow of International Society for Optics and Photonics (SPIE), and members of the American Society for Precision Engineering (ASPE) and Hong Kong Young Academy of Sciences (YASHK). He currently serves as the Associate Editor ofASME Journal of Micro- and Nano-Manufacturing, IEEE Transactions on Nanotechnology, and HKIE Transactions. In 2003 and 2018, he received the prestigious R&D 100 Awards for developing a six-axis nanopositioner and an ultrafast nanoscale 3-D printer respectively.